Mist Nozzle Kit


	Home >> Products >> By Manufacturer >> Beta >> Accessories >> Mist Nozzle >>


	Custom Search

Call For Quote 1 800 230-1426

Live chat by Boldcenter

Proud Members of:

Mist Nozzle Kit (DR-1000 and DR-2000)

Model	Description	Code #
Plastic Mist Nozzle Kit	Comes with norprene sanitizer size pump tube and fittings to attach to transport line	069254
Metal Mist Nozzle Kit	Comes with norprene detergent size tube and fittings to attach to transport lin	069441
Plastic Mist Nozzle Kit	No pump tube included	069140

Less frequent battery replacement comparted to competitors' product

Comes in metal or plastic

Two plastic nozzles can be run from one dispenser; simply attach a "T" fitting to split the feed line to two nozzles

Useful for a variety of applications, from deoderizing to boicide

Low cost than most competing products

Internal screen to prevent impurities from clogging nozzle

Specifications

All based on water tests. Results may vary due to varying chemical viscosities or tubing variances

Screen mesh: 200 wires/inch

Spray length, held horizontally: 42" with metal nozzle, 24" with plastic nozzle, 20" if 2 plastic nozzles

Spray diameter, held horizontally: 18" with metal nozzle (20" distance from nozzle), 18" with plastic nozzle (14" distance from nozzle), 10" with 2 plastic nozzles (10" distance from nozzle)

Spray height, pointing up vertically: 38" with metal nozzle, 15" with plastic nozzle, 10" with 2 plastic nozzles

Approximate flow rates: 126 ml/min with metal nozzle & detergent tube, 96 ml/min with plastic nozzle and sanitizer size tube

Tube life info: Sanitizer tubes are needed with the plastic nozzles. Detergent tubes may be used if the run time is extremely short, but we do not recommend this since the backpressure will drastically reduce tube life. The detergent tube would, however, rincrease flow by about 20%. Using 2 plastic nozzles will increase pump tube life due to reduced backpressure, and in this case the detergent tube is suitable. With the metal nozzle, a detergent size tube is suitable.

These specifications are subject to change without notice. Specifications for 2 plastic nozzles refer to feeding 2 plastic nozzles from one DR1000; in the test the transport tube ran about 4' to the "T" tube fitting, and then 28" to the nozzles on each side.