Liquitron^TM Controllers

Announcing the NEW Dual Controller from LMI

DX6000 Cooling Tower Controller with Conductivity/pH or Conductivity/ORP and Communications all in one.

The DX6000 offers a complete controller capable of measuring all of the parameters necessary for today's demanding water treatment programs. This controller can measure conductivity and pH or conductivity and ORP.                  Features: Conductivity/pH or Conductivity/ORP 0-20,000 uS or in PPM/TDS Temperature displayed in C or F High and Low Alarm with Output Relay Four Inhibitor Feed Modes Dual Biocide Pump Output Time or Conductivity Based Prebleed Data Logging/Remote Communications Twor Water Meter Inputs Flow Switch Compatible 4-20 mA Non-Isolaated Output Signal Four Tank Level Inputs with Alarms RS-232 Connection Port Programmable RS485 Address 32 Character 2-Line Backlit LCD Display UL,CUL, CE Certifited Data Sheet (pdf format)

The DX6000 offers a complete controller capable of measuring all of the parameters necessary for today's demanding water treatment programs. This controller can measure conductivity and pH or conductivity and ORP.

  

DC5500 Cooling Tower Controller with Remote Programming & Communications - New!

The DC5500 has all of the features of the popular DC4500 Controller(see below); dual biocides & inhibitor pumps control, 0-20,000mS conductivity range, four feed modes, etc. The DC5500 also has the additional features of a second water meter input, three tank level inputs, and most importantly- communications capabilities to download historical data, view real time conditions, and program the controller remotely. Each DC5500 has an RS232 serial port for data downloads into a pc or Palm Pilot™, or for quickly programming the various controller settings with a computer in a user-friendly pull-down menu format. Up to (31) DC5500 Controllers can be linked to a single LiquiComm Communications Module for remote communications on a standard analog phone line. The DC5500 can be used with a LiquiComm Communications Module and the LMI DataComm Software as a complete information management system for remote cooling tower accounts.

  

DC4500 Cooling Tower Controller

The DC4500 is a bleed and feed cooling tower controller with dual biocide timers. Standard features include; four feed modes (Feed & Bleed, % of Time, % of Bleed, Flowmeter Pulse), intermittent or continuous sampling, uS or PPM display, flow totalizer, manual test modes, temperature display, biocide cycle of 7, 14, or 28 days, biocide lockout, and conductivity or time-based biocide prebleed. Programming is simple and is accomplished with only three keys. The backlit liquid crystal display and LEDs provide a visual indication of operating conditions and equipment status.

  

DC4000 Cooling Tower/Boiler Controller

The DC4000 may be programmed as a bleed and feed cooling tower controller or boiler controller. Standard features include; four feed modes (Feed & Bleed, % of Time, % of Bleed, Flowmeter Pulse), intermittent or continuous sampling, uS or PPM display, flow totalizer, and manual test modes. The boiler mode includes a time-trap sampling method that prevents the flashing problems that are so common in boilers. Programming is simple and is accomplished with only three keys. The backlit liquid crystal display and LEDs provide a visual indication of operating conditions and equipment status.

  

AC4000/5000 Cooling Tower Controller

These new analog cooling tower controllers bring state-of-the-art technology to the entry-level controller market. The AC4000 is a simple, low cost feed and bleed controller. The AC5000 features three selectable feed options (Limit, % of Time, Flowmeter Pulse). Both controllers feature rugged, iron vane meters and a clear, lockable cover.

  

DP5000 pH Controller

The DP5000 pH Controller is designed for a variety of industrial pH applications including water treatment, metal finishing, PCB manufacturing and waste treatment. It provides on/off or proportional (pulse) control of metering pumps for addition of acid or base. Level and flow inputs and alarm outputs are standard. An advanced menu includes special features such as the solenoid dump valve control for batch treatment and a "Point 3" (inflection point) adjustment for fine tuning the control profiles of the metering pumps. 4-20mA output is optional.

  

DR5000 ORP Controller

The DR5000 ORP Controller is very similar to the DP5000 described above, however, it is designed to control LMI Metering Pumps for the addition of oxidizing and reducing agents. It shares the same features and options as the DP5000 and is often used in water and wastewater treatment, fruit processing and metal finishing.

  Only 

FS5000 Flow Switch Controller

The FS5000 Flow Switch Controller is designed for use in applications that require flow/no-flow control of metering pumps and other devices. It includes a flow switch and three (3) 115V receptacles that are powered with flow and one (1) 115V service receptacle. Power indicator light, flow indicator light and test switch are included.