|
APPLICATION
CL594 is specifically formulated to remove
dirt, oil, grease, and other organic contaminates. It can be safely used in boilers, heat exchangers, internal combustion engines, and closed water systems.
PHYSICAL PROPERTIES
Color and Form Amber liquid
Specific Gravity 1.051
pH 11.3
Density 8.84 lbs./gal.
Odor Faint soapy
Cleaning Procedures
FOR HEAT EXCHANGERS, CHILL/HOT WATER PIPING SYSTEMS:
- Add CL594 at a rate of 1 gallon per 100 gallons of capacity while system is being filled.
- Heat the cleaning solution to 160Of, if possible, and circulate at least 6 hours.
- Remove heat and circulate to 100 degrees F or less; drain systems as
quickly as possible and refill with clean water.
- Circulate for 6 hours at design temperature, then drain
- Refill with clean water and repeat until system cleaner is removed.
- Neutralizing agents are not necessary with CL594.
Handling & Precautions
Avoid eye and skin contact. Normal protective clothing and
polyethylene or rubber gloves should be worn when handling this product. A dust mask should be worn in the absence of adequate ventilation. In case of eye or skin
contact, flush thoroughly with water. Obtain medical attention for eyes. Refer to the Material Safety Data Sheet for additional safe handling information.
Packaging and Price
Cannon Water Technology's CL594 liquid is packaged in :
5-gallon pails......Net Weight 45 pounds...................$85.68 each
|
