Monitor... Flowlock-out, current loop on conductivity, dry contact alarm
Smarts... Water treatment maintenance, help hot links
ALL THE OPTIONS YOU NEED IN ONE UNIT
2 Controls; conductivity and inhibitor, 2 Biocide timers, 2 Water meter inputs, an
alarm output and a 4-20mA output.
PRE-CONFIGURED
2Smart setpoints, water meter type, biocide timing, inhibitor feed mode, alarm points
can all be pre-set. Plug in 2Smart and it's running your water treatment program
immediately. Flatten the learning curve!
LOW COST PRECISION
2Smart controllers do not compromise Aquatrac's tight conductivity control. 16 Bit
resolution delivers and you still get cooling water temperature alarms
SUPER HELP SMARTS
Sensor fouling alarms, fail-to-feed, fail-to-bleeds, feed limit timers.. 2Smart puts a little water treater Smarts into every controller
END MECHANICAL FLOWSWITCHES
2Smart's combine the conductivity sensor and the flow switch. 2Smart does not use magnets and does not slide up and down
FLEXIBLE INHIBITOR AND BLEED CONTROLS
Bleed on water volume, conductivity or time.. Feed on % bleed, after bleed, % time,
watermeter... 2Smart's got the mode to minimize water and chemical costs
COMMUNICATE AND CONTROL WITH EASE AND FLEXIBLITY
The TV remote keypad previews and adjusts setpoints, sets-up biocide feeds. An
optional serial port views five weeks of logged data, water usages, pump and valve ON times... FlexNet controller-to-controller networking links multiple 2Smart's to
Aquatrac's Flex an AS controllers, modems and local PC's
2 Controls; conductivity and inhibitor, 2 Biocide timers, 2 Water meter inputs, an
alarm output and a 4-20mA output.